Sikabond 150 Acrylic Adhesive PSA
SikaBond®-150 Premium Floor is a pressure-sensitive adhesive designed for full surface bonding of mentioned below floor coverings on absorbent and non-absorbent substrates in interior areas: Luxury vinyl tiles (LVT) Woven fabrics Linoloum coverings Single or multilayer needle felting Natural fibre coverings with backing Impact sound insulation underlays Carpets with PVC, PU or filler-free backing Corkment and cork linoleum PVC and cushioned vinyl (CV) floor coverings Rubber floor coverings in sheets Rubber floor coverings as tiles
Sikabond 150 Acrylic Adhesive PSA Advantages
- Up to 8 hours of working time
- Very easily spread
- Low consumption / high coverage
- High initial adhesion power
- Suitable for wet and semi-wet bonding
- Suitable for use with underfloor heating
- Suitable for use with castor-chairs
- Suitable for shampooing
- Suitable for difficult coverings
4 gallon (18 kg) pail
Ambient Air Temperature
Room temperature between +59°F (+15°C) and +95°F (+35°C). For ambient temperatures standard construction guidelines should be followed. Follow all wood floor manufacturers’ acclimation and room temperature requirements.
Relative Air Humidity
Between 40 % and 60 % during installation is best for adhesive. See wood floor manufacturer for wood requirements.
During laying and until SikaBond®-150 Premium Floor has fully cured, substrate temperature should be greater than +60 °F (+15 °C)and in the case of radiant floor heating, less than +70 °F (+20 °C). For substrate temperatures, standard construction guidelines should be followed.
Substrate Moisture Content
Where moisture readings exceed 9 lbs / 1000 sq. ft / 24 hrs or 90% RH (or 6 lbs/ 85% RH prior to install linoleum or rubber)
24 hrs (final strength after 72 hrs)
0–120 minutes (depending on laying method and porousity)
20 minutes – up to 8 hours (depending on laying method and pourosity)
Visit Our Phoenix Showroom!